China High quality Split body WCB Body Aluminum oxide Y type slurry valve for alumina slurry Special valve

FREE-VALVE brand Pneumatic operated dome valves are designed for ash handling system.Dome valve is unique in its ability to open and close with a tight pressure seal in environment where abrasive material are passing.Dome valve can achieve operating reliability in severe applications .

Double acting pneumatic knife gate valves are suit for any abrasive medium and operated by double acting pneumatic .

Pneumatic hard alloy seated rotating disc gate valves are designed for higher temperature in the fly ash system at coal power plant ,less than 350 Degree

FREE-VALVE’s FRZ644TC Flange end Pneumatic Actuator Ceramic Twin Disc Balance Gate Valve is mainly used in feeding and dumping the dry powder and the transport pipeline, which not only adopt toughening ceramic as shut off and wear out resistance material

Stainless Steel Ceramic Lined Ball Valves are designed with engineering ceramics. The engineering ceramics internal parts provide excellent wear resistance and corrosive resistance , the stainless steel ceramic ball valves are widely used as an open and close function in corrosive and corosive medium with abrasive solids content.

FREE-VALVE’s Pneumatic Ceramic Rotary Gate Valves are designed for pressurized and vacuum systems including pneumatic conveying systems, discharge and vent applications in steel plant and coal power.

Open and close test for pneumatic ceramic lined double disc gate valve

FREE-VALVE’s Pneumatic Ceramic Double Disc Gate Valve is mainly used in feeding and dumping the dry powder and the transport pipeline, which not only adopt toughening ceramic as shut off and wear out resistance material,

FREE-VALVE’s Pneumatic swing tungsten carbide single plate gate valve are suitable for steel plant, cereals transport system, cement transport systems,ECO system,GAH system and EP system in coal fired power plant. In these applications, pneumatic conveying method is used to reduce manpower demand, and improve system efficiency and reliability, and is easy to realize automation.

These pneumatic ceramic back forth sliding gate valve are produced for one of Mexico Customer.

The video shows the installation process of the magnetic position sensor .

FREE-VALVE’s Manual Wafer type Ceramic Butterfly Valves were operated in the harshest control environments and offers excellent resistant to cavitation which is major problem for process control valves. 

Pneumatic metal seated rotating disc gate valve is designed for higher temperature in the fly ash system at coal power plant

FREE-VALVE’s FRJ545Y Y type slurry globe valve is ideal for many applications because the valves are designed for use on abrasion materials. 

3 inch class 150 Pneumatic ceramic lined double plate gate valve opening test

The video shows the pneumatic knife gate valve opening and closing process

FREE-VALVE’s  Split body WCB Body Aluminum oxide Y type slurry valve  is ideal for many applications because the valves are designed for use on abrasion materials.  Split body WCB Body Aluminum oxide Y type slurry valve is divided into left and right parts with a seat between them. The bolt connecting the two parts can be dissembled to replace the valve seat.The valve with abrasion resistance,high pressure resistance,erosion resistance and anti-scabbing performance.

Ceramic valve disc is mainly used in pneumatic ceramic double gate valves, pneumatic ceramic swing gate valves,

Pneumatic ceramic lined double disc gate valve is designed for fly ash at ash handling system in coal fired power plant

Pneumatic knife gate valve is installed at cement plant

FREE-VALVE’s pneumatic and manual operating flat tank flush bottom valves are designed for the convenient and fast discharging the material or samples from the bottom of the reactor,drain or feed vessel .The valve can be welded or installed on the vessel through the flange at the bottom of the valve or on tank wall.

The video shows the sealing surface of ceramic lined disc

The video show the opening and closing for pneumatic ceramic rotary gate valve, Ceramic lined sealing makes the valve having anti abrasive performance,So it suits for wherever opening and closing frequently .

DN150 PN10 Pneumatic ceramic lined double rotary disc gate valves are packed into wooden box

Stainless steel ceramic lined butterfly valve is designed for any abrasive and corrosive working conditions ,to replace any metal seated butterfly valve with longer working life .

Ceramic ball machining is a part of machining process of the ceramic lined ball valve .The ceramic ball has anti abrasive and anti corrosive performance .

Ceramic lined rotary disc gate valve is being machining at work shop by grinding machine

FREE-VALVE’s Manual operation Split body Y Type Slurry Valve is ideal for many applications because the valves are designed for use on abrasion materials. Manual operation Split body Y Type Slurry Valve is divided into left and right parts with a seat between them.

Pneumatic hard alloy double disc rotary gate valve is designed for higher temperature in the fly ash system at coal power plant

FREE-VALVE’s Pneumatic Ceramic Rotary Gate Valves are designed for pressurized and vacuum systems including pneumatic conveying systems, discharge and vent applications in steel plant and coal power. The whole of ceramic sealing faces of the valves are well ground and polished, which is ensure a reliable sealing performance of the valve.